HMPE Chafe Sleeve
Abrasion Resistant Tentex® Cover
Replacement cover/chafe sleeve for high-tech cores. Excels in areas where the line should slide, like halyard exits.
This Tentex® cover is perfect for use with high tech cores or twelve strands (Endura-12, V-12 or PBO). It is very tough and abrasion resistant and easily taperable for halyard ends.
FEATURES
Material: Tentex® Applications: sheets, halyards, guys
technical product data
| Product Name | Diameter [mm] | Diameter [in] | Length [ft] | Weight [lbs/100′] |
|---|---|---|---|---|
| C1934-04-00600 | 4-5 | 5/32-3/16 | 600 | 0.43 |
| C1934-04-00300 | 4-5 | 5/32-3/16 | 300 | 0.43 |
| C1934-06-00600 | 5-8 | 3/16-3/8 | 600 | 0.68 |
| C1934-06-00300 | 5-8 | 3/16-3/8 | 300 | 0.68 |
| C1934-08-00600 | 8.5-11.5 | 3/8-1/2 | 600 | 1.01 |
| C1934-08-00300 | 8.5-11.5 | 3/8-1/2 | 300 | 1.01 |
| C1934-10-00600 | 12-16 | 1/2-5/8 | 600 | 2.10 |
| C1934-10-00300 | 12-16 | 1/2-5/8 | 300 | 2.10 |
| C1934-12-00600 | 16-20 | 5/8-13/16 | 600 | 5.42 |
| C1934-12-00300 | 16-20 | 5/8-13/16 | 300 | 5.42 |
Typing errors and technical changes reserved. The data are typical values without warranty or guarantee. For questions we are always at your disposal